BONDCRETE Two component polymeric system for repairing cracked and damaged concrete structures. Excellent system for water proofing, foundation bolt grouting and patch repair by using quartz sand and silica powder. Suitable system for bonding old to new concrete.

BONDCRETE water proofing compound is a single component water thinable protective coating to be applied over exterior surface of walls to prevent entry of water and moisture from the surface.

BONDCRETE water repellant is non-flammable water soluble solution designed to incorporate water repellency to varied surface like sand stone, marble, concrete, exposed bricks and terrakota tiles.

BONDCRETE sealer is a single component water thinable polymeric liquid for sealing porosity of sand stone, concrete and other porous surfaces. Water can be added to any quantity depending upon porosity of the surface.

BONDFIT is a single component, polymeric metal pipe joint sealing compound to prevent leakages. BONDFIT is oil, petrol, hot and cold water resistant

Bondfit White is a white colored all purpose thread sealing compound with which leakproof sealing can be done on threaded connections. It gives lubrication while tightening of threads, seals and protects threads in an extensive variety of plumbing & threaded G.I. pipe connections over a wide range of services, temperatures and pressures.

Bond set (Aluminum):- This is a putty specially developed for aluminum metal surface. It is very fast setting aluminum filled putty for varied applications such as- filling blow holes. on aluminum castings, mechanical repairs, for oil leakage repair in oil transformers and petrol tanks..

Bond set (Fast setting):- High strength, fast setting adhesive putty for varied applications such as- pattern making, leakage repair, to remove dents on automobile surface etc.

Bondset Handicraft is a two component hand kneadable epoxy compound specially developed for master craft mens, Mural maker, pottery designer etc. its longer pot life is an advantage to the designer to implement their thoughts in moldings & can create desired shapes & patterns conveniently.

Bond set (Under water):- Unique material sets in presence of water, 20 minute setting putty for repairing online leakage in industrial and domestic pipe lines.

Bond set (Steel):- This is thermal conductor putty specially developed for steel metal surface. It is very fast setting steel filled putty for varied applications such as- filling blow holes. on steel casting, mechanical repairs, filling blow holes on engine parts etc..

Bond set (White):- it is a white colored adhesive putty for varied applications such as- for tile joint fitting, making murals, mouldings and handicrafts etc.

BONDTITE Ferol Two Component adhesive for several industrial related applications where long potlife is the main requirement, such as assembly of speaker, textile shuttle, reed , composite , automotive, bolt grouting, handicraft, bathroom fitting , door closer, heating element manufacturers etc. It can also be used for bonding marble moulding over marble, wood or concrete surfaces, for manufacturing marble temples, statues, pillars etc.

BONDTITE METALLIC:- Now we start the trial of Bondtite Metallic. It is a fast setting adhesive for metal surface repair applications such as Main gate of bunglow, Sealing of screw heads ,Drill hole filling , to hide welding marks & undulations in window , Stair case Grills before painting, machinery repairs etc.

BONDTITE UNIWELD:- Now we start the trial of BT[U]. It the most strength adhesive in Bondtite range, Basically it is very fast setting adhesive for magnet to frame bonding in speaker, very high strength bonding material for wood, marble, plastic & metal etc. Excellent adhesive for ship building, fibre glass component bonding, for pasting of marble, border on marble top in bathroom and kitchen. It can also be used on oily surface like to repair oil tank, cylinder etc.

BONDTITE (WHITE PASTE):- High strength white adhesive for bonding dissimilar substrates like marble, ceramic, metal, glass, wood, fibre glass etc.. Joints made with this system are 100% waterproof.

BONDTITE (ARTIFICIAL JEWELLARY): - Bondtite (AJ) is a transparent adhesive are high strength two component epoxy adhesives & are unique solutions for applications where extremely high strength are required, these adhesives can bond various similar and dissimilar materials such as metals, ceramics, wood, leather, rubber, marble, glass etc. and give transparent bond. Bondtite transparent adhesives remain unaffected to mild alkalies and acids.

BONDTITE (FAST & CLEAR):- As the name of product itself defines its properties that it is fast curing and transparent adhesive. Very fast setting clear adhesive for handicrafts, artificial jewellery manufacturing, glass to metal (for magnetic lock on Glass doors), glass to glass bonding including construction and repairing applications etc

BONDTITE (GEL) :- BondTite Gel is a medium strength two component highly viscous thixotropic adhesive. It is an excellent adhesive for sealing electronic components, coating on tile joints to avoid colour change of grout by acting as an weather sheild, for making small beads over sari, chunri, hair clips and artificial jewellery. Jari & Colours can be added to give desired effect on textile, glass etc.

Bondtite handicraft is suitable for fixing head light reflector and glass to rim, bonding metal parts to glass in miniature bulbs, fixing wipers on car, fixing aluminum caps to glass shells in night bulbs manufacturing, bonding of cooling coils to freezers in refrigerators, making of PCB???s, fixing diaphragms and magnet to base plate of speaker, bonding steel body to grinding stone in wet grinder, for assembly of mixers, washing machines???, gas stoves, for fixing loose handles of tools, for joining of marbles, to repair broken picture frame, to repair jewellery, to stick broken toys, to bond concrete chips at the back of polished granite tiles, to seal cracks in walls, for assembly of bath fittings and gate valves as an adhesive in bangles and brassware handicrafts.

BONDTITE HIGH IMPACT:- Now write down about the details of BT[H].
It is also a two Component adhesive for several industrial related applications where very high vibration or impact resistance is the main requirement, such as speaker, textile shuttle, reed , composite , automotive, bolt grouting etc. It can also be used for bonding marble moulding over marble, wood or concrete surfaces, for manufacturing marble temples, statues, pillars etc

BONDTITE [RAPID]:- It is also a fast curing epoxy in bondtite range. It is mostly used in automobile sector where fast curing is main requirement. Such as Leather to aluminum drum bonding in Break Shoe, Armature repairing, Head repairing etc.

BONDTITE (SUPER STRENGTH):- is a high strength two component epoxy adhesive system. These systems are tailor made to bond similar and dissimilar materials such as metal, ceramic, wood, leather, rubber, marble, glass etc.

BONDTITE (TIME SAVER):- As the name of product itself defines its properties that it is fast curing and transparent adhesive. Very fast setting clear adhesive for handicrafts, number plates and other hose hold purpose including construction and repairing applications etc

Crackbond granite is a medium viscosity system for filling crack and pin holes present on granite surfaces.

Crackbond marbofin is a higher viscosity system for filling broad cracks and pittings present on marble and granite surfaces.No shrinkage iobserved when cured in mass and it has less tendency for yellowing with time.

Crackbond Medium setting is a for filling cracks and pinholes present on green and other colored marbles, because this system may become slight yellowish after curing.

Crackbond pointing is a modified system for filling joints of marble flooring in place of white cement. After curing this system gets converted to marble white colour.

Crackbond high penetration is a modified system for filling very fine micro cracks present on marble surface.

Gasket bond is a fast drying, flexible setting sealing compound for sealing gap between gasket and metal surfaces to make the joint leak proof, it has excellent gap filling tendency and can withstand upto 120??c.
Major advantage of using gasket bond is that the applied film can be peeled off easily without damaging the surface. Gasket bond find major usage in industries, automobile workshops & by reputed auto machines.

RESIBOND:- It is generally in clear/black/white colors. RB is a high performance non corrosive sealant suitable for making gaskets over flanges. It replaces paper gasket & gives temperature resistance of 200*c.

Resibond 1010 is a cost effective, acetic cure quick drying formulation offering long term durability in a range of general glazing applications. It may be used to glaze, seal, and fill joints on windows, skylights, signs, Internal/external fixtures and fittings, doors etc.

RESIBOND 2010-(Glass) It is a fast drying high performanceacetic cure silicon sealant for industrial applications

Resibond 3010 is one part neutral cure silicone which cures to a tough rubbery solid when exposed to moisture in the air. Excellent resistance to weathering, UV light, moisture, ozone, vibration & extreme temperature. Long life reliability cured sealant stays rubbery from -60 to 200oC without tearing, cracking, drying out or becoming brittle. All temperature Gunnability can be applied in any season. Available in translucent and black color. Resibond 3010 will not flow under its own weight. It can therefore be applied overhead or on vertical joints and surfaces without slumming, sagging or running out.

Resicast liquid metal is a metal filled single component epoxy is a thermally conductive adhesive developed for the applications where high thermal conductivity required like many high temperature electronic , Mould repair & manufacturing applications. It posses excellent adhesion to glass , ceramics, metals & some rigid plastic.

Resigrip XR is a synthetic rubber based semi-drying, visco-elastic grey colored polymeric sealing compound. This product is excellent for sealing small gaps the metal joint surfaces to prevent leakage of oil, water and chemicals. It is used for sealing of two stroke motor cycle engine cases, it is resistant to engine oil, heat, pressure, vibrations & impact.
It is designed specially for sealing metal to metal surfaces & resists the temperature range from -40 to +150 degree C

Resilor is a single component synthetic high strength adhesive developed for sticking all kind of natural and artificial leathers, rubbers, sponge, textile, wood etc. It is an excellent product for Shoe , automobile, Furniture industries. It bonds any two materials in which one of them should be porous i.e. wood to wood, glass to wood, Stone to metal etc.

Resimet Thread Locker TL 944 is a single component anaerobic thread locking adhesive. It gives High strength to fasteners with assemblies, it allows fasteners to withstand vibrations, resist shock and impact loads, it offers High performance and seals thread to prevent leakages and corrosion. It is being applied where higher Dia i.e. 20 mm fastners are used. It gives better solvent resistance.

Resimet flange sealant is an orange colored single component thixotropic anaerobic adhesive to seal close fitting joints between rigid metal faces & flanges. It offer precise, reliable sealing and can be applied manually for small jobs or with dispensing device for high volume assembly, Application can be done by stenciling, valve dispensing and screen printing. It is an excellent product for form in place gaskets, gasket dressings and general purpose sealants to meet broad gasketing and sealing needs. Makes flexible gaskets for rigid machined flange with less than 0.5mm gap. Good chemical resistant.
Typical Application: Used as form-in place gasket on rigid flange connections such as gear-box and engine casting etc.

Resimet HS 644 is a single component anaerobic sealant is particularly suitable for hydraulic seal, a medium strength anaerobic adhesive having ability to seal gap upto 0.2 mm. HS 644 is a thixotropic liquid which prevents migration of adhesive before curing. HS 644 is recommended for sealing of large fine threaded component for hydraulic and pneumatic fittings ideal for through holes of the parallel type. Replacement of ???O??? rings.

Resimet pipe sealant is a yellow colored single component thyrotrophic anaerobic adhesive to seal threaded joints between metal pipe & socket. It contains a PTFE particle which offers lubrication while tightening the joint & gives reliable sealing.

RUSTOFREE is a single component rust remover, developed for loosening rusted nuts, blots & machinery parts. RUSTOFREE dissolves rust, carbon, tar etc. in 15-20 minutes without affecting the surface of iron, steel or any metal part. It does not contain corrosive acids or any chemical which will damage the surface of any metal.

Solvobond is a high quality PVC solvent cement used for repairing and bonding of PVC pipes & components made from PVC like telephones, PVC floor tiles, PVC doors etc. Because of its non drip and gap filling nature it gives more coverage and makes joint leak proof which can with stand temperature from 35 to 90oc

It is a polyvinyl acetate based white emulsion adhesive for wood working & general bonding applications. It is also called water based adhesive. We have seen it in furniture building or manufacturing applications.

ZESTA FABRIC GLUE:-
Ideal adhesive for pasting beads, Diamonds, decorative components etc on natural & synthetic fabric. It can bond PVC to PVC, Paper, Wood, Cloth, Leather, Glass etc.
Zesta fabric glue is a milky white colored single component air drying gel which becomes transparent & remains flexible on complete drying. It dries in 10-12 minutes if applied in thin film & it takes longer time if applied in more quantity accordingly.
Zesta fabric glue is an excellent adhesive for pasting small moulding on magnet, making decorative ribbons, caps, jeans, shoes, fancy chappals, purses, home d??cor projects etc. It can also be used as a transparent lining material on glass for doing stain glass application, mirror decoration, Table lamp designing etc. Zesta fabric glue gives water resistant and water clear bonding, gentle washing may be done after 24 Hrs from the time of application. It is non corrosive & resists hot water. It can also be used for bonding laces to pelmets, curtains, glass, mirror, picture frames etc.

Vitrores is a single component light curable adhesive which sets in seconds on exposure to UV/sunlight. Vitrores is excellent for bonding glass to any substrate like glass, metal, ceramic, wood, rigid plastics etc. & has excellent weather resistance, is non yellowing and give very high adhesion.

Vitrores is a single component light curable adhesive which sets in seconds on exposure to UV/sunlight. Vitrores is excellent for bonding glass to any substrate like glass, metal, ceramic, wood, rigid plastics etc. & has excellent weather resistance, is non yellowing and give very high adhesion.

VITRORES GEL- It is thyrotrophic , clear adhesive used for glass to metal Memento making, small beads bonding and for making glass furniture etc.
Vitrores gel is UV/visible light curable, multi substrate bonder that exhibits excellent peel strength, the cure product is optically clear, exceptionally flexible and demonstrate outstanding elongation.
Vitrores gel is recommended for applications where a tough, durable and moisture resistance bonding is required. Because of the ability to bond many substrates and the ability to withstand the stress of thermal cycling. Vitrores gel is very well suited for used as a UV curable potting composition. The low Durometer and exceptional moisture resistance make Vitrores gel a technically superior substitute for silicone sealant. Vitrores gel contains no acids, hazardous material or corrosive ingredients.

Zirmek adhesive is a ready to use single component polymeric adhesive for fixing ceramic tiles, wooden moldings on vertical surface. It poses good non-sag behavior, fast drying and very high flexibility. Best adhesive for ceramic tile, Glass, mirror surface. Gypsum wall board, cured cement plaster, wooden board etc. Surface where zirmek adhesive is to be used should be clean and dry before application. After curing zirmek adhesive becomes water proof, to prevent entry of water/moisture from the substrate which may weaken the bond, apply Bind Crete water repellent before application of Zirmek adhesive to make the surface water in sensitive.